Goldlaser|from China
  • home
  • Products
    • Fiber Laser Marking Machine
    • Co2 Laser Marking Machine
    • UV Laser Engraving Machine
    • Laser Cleaning Machine
    • Laser Welding Machine
  • FAQ
  • Contact
  • blog
Home FAQ

Method for finding focus of fiber laser marking machine

What is the focal length? Focal length is the distance from the optical center of the lens to the fo...

Goldlaser 2019-12-26 1277

Laser marking machine can not find the dongle

"Can't find the dongle, the software will work in demo mode" This prompt is believed t...

Goldlaser 2019-07-24 2282

Parameters of Laser Marking Machine Marking Black

Parameters of Laser Marking Machine Marking Black

Asked questions from users: How to adjust the parameters of the laser marking machine? The wave lase...

Goldlaser 2019-07-12 1537

Can't find LMC of EZCAD of laser marking software

1: Check whether the computer is connected with the machine correctly and well;2: The whol...

Goldlaser 2019-07-09 4655

What is the difference between 50W and 30W fiber laser marking machines?

Fiber laser marking machine has 20 watts, 30 watts, 50 watts, different power prices are not the sam...

Goldlaser 2019-07-08 1492

Laser powder: laser marking additives make plastic marking easier

Laser powder: laser marking additives make plastic marking easier

Everyone knows that fiber laser marking machines can be engraved on metal and most non-metallic prod...

Goldlaser 2019-06-14 838

MOPA laser: the effect of frequency and power on stainless steel laser marking

MOPA laser: the effect of frequency and power on stainless steel laser marking

Pulse width and frequency are the characteristics of MOPA lasers, which are independent of each othe...

Goldlaser 2019-06-11 1022

Laser marking machine area parameter setting

Laser marking machine area parameter setting

The regional parameters of the laser marking machine are shown in Figure 10-20.10-20 区域参数Area s...

Goldlaser 2019-06-05 1274

Laser marking airport mirror range is not necessarily good

When you buy, you must first consider the following aspects:What wavelength field mirror is used?Cho...

Goldlaser 2019-06-03 545

How to make the laser marking machine make photos more clear

How to make the laser marking machine make photos more clear

To set the appropriate DPI parameters, generally 100~500, according to the spot size setting, the la...

Goldlaser 2019-05-31 607

1 2 next page last page

NEW Article

  • How much electricity is charged for one hour of fiber laser cutting machine

    How much electricity is ch

    2020-06-29784
  • Method for finding focus of fiber laser marking machine

    Method for finding focus o

    2019-12-261277
  • Composition of a ruby laser

    Composition of a ruby lase

    2019-12-031543
  • Comparison of models adopted for PCB two-dimensional code laser marking

    Comparison of models adopt

    2019-12-031229
  • Introduction to Single Frequency Fiber Laser Technology

    Introduction to Single Fre

    2019-11-071298
  • What are the wearing parts of a fiber laser marking machine?

    What are the wearing parts

    2019-11-071128

Top Article

    About us

    GoldLaser focuses on the production and development of laser marking machine, laser cleaning machine and laser engraving machine.
    Copyright © 2019 By:Laser marking machine Manufacturer

    Contact us

    contact-us:

    QQ:251955658

    weibo:weibo.com/goldlaser

    WeChat:goldlaser

    Follow us

    Goldlaser|from ChinaQR code
    QR code