Reasons for the weakening of the laser of the fiber laser marking machine

goldlaser2021-06-14931

1,The lens is dirty and stained

This kind of problem only needs to use some cotton swabs to dip some alcohol on it, and then scrub each lens of the marking machine, beam expander and focus lens, etc., to remove the stains on it, and the problem of shallow typing can naturally be solved. Up;

2,The light path has deviated

If this happens, the light path must be re-adjusted to restore it to its best state;

3, the marking speed is too fast and the filling method is unreasonable

In this situation, the marking speed can be reduced, and the original filling method can be adjusted. In addition, it is necessary to determine whether the workpiece is on the top, and re-adjust the focus.

4,the current problem of the laser marking machine

If it is because the power supply current of the equipment is too small, it will also affect the depth of the marked characters or patterns. At this time, increase the current of the laser power supply and reduce the frequency of the marking machine so that the marking machine can operate normally. Avoid the situation where the words on the marking are too shallow;


特别声明

本站Goldlaser|from China提供的“Reasons for the weakening of the laser of the fiber laser marking machine”来源于网络,不保证外部链接的准确性和完整性,同时,对于该外部链接的指向,不由Goldlaser|from China实际控制,在2021-06-14 10:26:56收录时,该网页上的内容,都属于合规合法,后期网页的内容如出现违规,可以直接联系网站管理员进行删除,Goldlaser|from China不承担任何责任。

Product Inquiry

What products do you need? Our products include laser marking machine, laser cleaning machine and hand-held laser welding machine

Add WeChat friends